Printer Engineers X3

Must have printer repair experience (preferred) or elctro-mechanical repair experience.

• Fault finding:

• Demonstrated Electronic ability.

• Demonstrated Electro-Mechanical ability.

• Test ability.

• Fault finding skills.

• Repair to component level under direction.

• Repair to modular level.

• Logical approach to repair.

• Use of basic test/diagnostic hardware.

• Product range:

• Knowledge of core team product.

• In depth knowledge of assigned product

• Identify WPIB/ELF/DOA.

• Able to work on other sections.

• Software:

• Basic PC literacy.

• Relevant diagnostic software.

• Knowledge of MS applications.

Must have demonstrated written, and verbal communication skills, 1-5 years relevant experience or C & G Level 2/3 or equivalent studies, and pass companies engineer assessment.

Laptop Technician

Fault finding, diagnosis and repair experience on laptops required.

Technical skills required:

• Fault finding:
  • Demonstrated basic Electronic ability
  • Demonstrated basic Electro-Mechanical ability
  • Basic test ability
  • Basic fault finding skills
  • Repair to modular level under direction
  • Logical approach to repair
  • Use of basic test/diagnostic hardware
• Product range:
  • Awareness of core team product
  • Knowledge of assigned product
  • Identify WPIB/ELF/DOA
  • Able to work on other sections
• Software:
  • Basic PC literacy
  • Relevant diagnostic software
  • Basic knowledge of MS applications

Must have demonstrated written, and verbal communication skills, and pass companies Technician assessment.

TIG Welders

Welding (TIG), stainless steel and mild steel

Must be a TIG welder

Mon-Sat, flexible hours. Several months work.

Production Operative

Three Production Operatives required to work within the laminating department of a production company based in Bedford. Must have experience within production and be able work in a team. Full training will be given.

Mechanical Technician

• Must have a working knowledge and understanding of all mechanical, hydraulic and pneumatic equipment on site - including any future equipment when required.
  
• Have the ability, and assist with all aspects to construct, operate and maintain the above plant in a safe and efficient state, and to comply with all relevant legislation - ie: Factories Act, Health & Safety at Work Act, Power Press Regulations, Control of Substances Hazardous to Health.
  
• Have the ability to maintain integral plant - ie: hydraulics systems, gas burners, servo systems, PC and CNC systems.
  
• Have the ability to undertake minor electrical work on single phase equipment - ie: 240/110 volt equipment, hand tools, lights etc.
  
• Be a member of a production area team if required and fulfil duties within the team for engineering and production functions. Within this will include active involvement in improvement teams to examine issues raised and where cost benefit improvements may be introduced.
  
• Be willing to undertake all training necessary to fulfil the above requirements.
  
• Have a fully flexible approach to the work, ensuring priority work is completed first and problems are resolved.
  
• Carry out the duties of the Senior Technician (Mechanical) in his absence.
  
• Take on other duties as may be required from time to time.
  
  
  

Line Engineer

To work as a team member in all production departments by operating specified machinery and moving packaging materials.

The Role:

• To correctly operate all machinery and lead the line for which they are responsible, whilst carrying out the job function as instructed by the Team Leader/Shift Manager.
• To rectify simple machine operational faults and effectively report more complex faults for repair by others.
• Handling and preparation of raw materials, used in the manufacture of food products.
• Consistently checking product and packaging against the required standards.
• Undertake and participate in any training programs organised and in turn to co-operate in training and monitoring new team members.
• Ensure that their lines maintain the correct levels of hygiene and GMP standards.
• Loading and unloading of raw materials, packaging, moving and handling of stock.

The successful candidate will need to be motivated and have the ability to work as a team member by operating specified machines, carrying out machine minder duties to the highest standard. You will also need to have a flexible approach to working, have excellent technical, communication and organisational skills.

Must come from a mechanical background, could have completed an apprenticeship of been a vehicle mechanic.

Mon-Fri 6am-2pm & 2pm-10pm

Line Engineer (Nights)

To work as a team member in all production departments by operating specified machinery and moving packaging materials.

The Role:

• To correctly operate all machinery and lead the line for which they are responsible, whilst carrying out the job function as instructed by the Team Leader/Shift Manager.
• To rectify simple machine operational faults and effectively report more complex faults for repair by others.
• Handling and preparation of raw materials, used in the manufacture of food products.
• Consistently checking product and packaging against the required standards.
• Undertake and participate in any training programs organised and in turn to co-operate in training and monitoring new team members.
• Ensure that their lines maintain the correct levels of hygiene and GMP standards.
• Loading and unloading of raw materials, packaging, moving and handling of stock.

The successful candidate will need to be motivated and have the ability to work as a team member by operating specified machines, carrying out machine minder duties to the highest standard. You will also need to have a flexible approach to working, have excellent technical, communication and organisational skills.

Must come from a mechanical background, could have completed an apprenticeship of been a vehicle mechanic.

Mon-Fri 10pm-6am

Design Engineer (Electronics)

Job Description:
The Engineer will provide key electronics design, product development and testing skills for the creation and support of a range of environmental and occupational monitoring instrumentation.
Plays a key role within the R&D team providing competent component level analog and digital circuit design skills/knowledge necessary for the creation of reliable, effective and up to date product designs.

Key Result Areas.

• Deliver effective, tested and reliable electronic circuit designs to project timescales and deadlines.
  
• Apply competent electronics, engineering problem solving and research skills in support of day-to-day design or product maintenance tasks.
  
• Liaise at least fortnightly with project leader and product managers to ensure project tasks and issues remain visible and on target.
  
• Work to design specifications and proactively offer their own ideas for design and innovation.
  
• Maintain up to date knowledge of the companyâ s products and applications.
  

Knowledge, Skills and Experience Required:

• Demonstrate robust experience of analog and digital circuit design leading to successful products.
• Ideally experience gained within an electronics design role preferably within instrumentation / monitoring equipment environment.
• Able to demonstrate initiative and capability of making clearly thought out and independent decisions where necessary
• Proven communications and organisational ability. Demonstrate a proactive approach to projects and problems with the ability to self manage small projects and teams.
• Strong track record in provision of accurate, functional engineering solutions and resolution of technical problem issues
• Experienced in working independently and as part of a small project team
• Intermediate to advanced use of PCs and MS Office applications. PSPICE knowledge is desirable.
• Excellent attendance and punctuality
  

Qualifications:
HNC / HND or Degree level qualifications in Electrical Engineering, or A level Physics and Mathematics background.

Manufacturing Support Engineer

Provide first line engineering support for the identification, investigation and resolution of day to day technical issues within Production, and assisting with the integration of new products to Production and Test arenas.


Key Result Areas:

• Effective & efficient resolution of technical problems occurring in the production area or elsewhere in the company.
• Maintain up to date knowledge of the company products and improved cross training, supervising and quality.
• Effective problem solving and communication leading to component level product knowledge with a desire to improve manufacturing efficiency and product quality.
• Occasional support to R&D with new product testing & launches, technical research and investigation tasks.

Typical tasks:

• Production problems.
• obsolescence.
• answering technical questions.
• teaching/training personnel.
• addressing quality issues.
• maintaining calibration records.
• suggesting/ implementing improvements.
• testing support, etc
  

Knowledge, Skills and Experience Required:

• ONC or HNC level qualifications in Electrical Engineering, O or A level Physics and Mathematics background
• Robust experience of component level fault finding on analogue and digital circuitry
• Ability to understand circuit diagrams and key component functions
• Ideally experience gained within an electronics role in instrumentation/monitoring equipment environment.
• Intermediate level use of PCs and MS Office applications (Word, Excel).
• Knowledge of, or a desire to learn, Visual Basic is an advantage
  
  

Machine Minder (Nights)

Monday to Friday 10pm-6am

To work as a team in all Production Departments by operating specified machinery and moving of packing materials.

The role:

• To correctly operate all machinery and lead the line for which they are responsible for whilst carrying out the job function as instructed by the Team Leader/Shift Manager.
  
• To rectify simple machine operational faults and effectively report more complex faults for repair by others.
  
• Handling and preparation of raw materials, used in the manufacture of food products.
  
• Consistently checking product and packaging against the required standards.
  
• Undertake and participate in any training programs organised and in turn to co-operate in training and monitoring new team members.
• Ensure that their lines maintain the correct levels of hygiene and GMP standards.. Loading and unloading of raw materials, packaging, moving and handling of stock.
  
  

The successful candidate will need to be motivated and have the ability to work as a team member by operating specified machines, carrying out machine minder duties to the highest standards. After completion of training on in-house machinery have the ability to go forth and achieve N.V.Q in Machine Operations. You will have also need to have a flexible approach to working, have excellent technical, communication and organisational skills.

Packaging Designer/Estimator

Dependent upon relevant skills and experience.

Joining a team of designer/Estimators you will work from client specifications carrying out the process of design and estimating from concept to completion. You should be able to demonstrate your design ability whilst analysing the cost effectiveness of the production process.

You will have a minimum of two years experience working with CAD, Impact sample case maker, packaging 3000 or relevant estimation/design packages. You will ideally have experience of fibreboard, timber and various types of cushioning foam and DEF standards experience to DR14, training will be provided for the right person.

Hours: Full-Time (Mon-Fri, Days)

Stacker/Process/Production/Packers

You will have worked within a manufacturing / production environment. Duties will include process, stacking, packing, handling, moving, cleaning, operating and setting up specified machinery, consistently checking product to QA standards. You should be able to work as part of a team and use your own initiative when required. You should have a flexible approach, good time keeping, attendance and a high level of personal hygiene.

HOURS: Sunday Thursday, 10pm 6am (Nights) or Monday - Friday, 6am - 2pm and 2pm - 10pm (Rotating day shifts)
CONTRACT: Temporary, as and when required